|
|
Post by bgeritz on Dec 20, 2015 13:49:24 GMT -6
Trying to get the pan tension set on my predator sets. On my closed jaw 4 coil laminated 650s I have loosened the pan tension screw to the point when the trap isn't set the pan just flops. However when I set the trap I still have well over 4# of tension. Any thoughts?
|
|
|
|
Post by ozarkmountainman on Dec 21, 2015 13:09:48 GMT -6
Dogless traps can be tricky. Is your jaw/pan contact point clean?
Dale
|
|
|
|
Post by bgeritz on Dec 21, 2015 20:06:29 GMT -6
They aren't shiny but they are not rusted up bad either. I've dyed them already but haven't waxed them yet.
|
|
|
|
Post by Walleye Joe on Dec 21, 2015 20:34:08 GMT -6
Your pan tension generally goes down after waxing. Get 'er done!
|
|
|
|
Post by ozarkmountainman on Dec 22, 2015 18:17:11 GMT -6
Wax 'em, scrape the excess off the contact point between the pan and jaw, and look at the three pounds you'll have left. Perfect.
Dale
|
|
|
|
Post by bgeritz on Dec 22, 2015 20:00:54 GMT -6
Thanks dale and walleye
|
|
Goodbye 2020